CSLA2EL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Housing Material | PBT |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSLA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 6V~12V |
| Current Rating | 550A |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 20mA |
| Output Type | Voltage |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 6V |
| Polarization | Bidirectional |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Sensitivity | 4.3mV/N |
| Max Supply Voltage (DC) | 12V |
| Min Supply Voltage (DC) | 6V |
| For Measuring | AC/DC |
| Current - Sensing | 550A |
| Length | 63.5mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
CSLA2EL Overview
For safety reasons, the current sensors are enclosed in Module, Single Pass Through packages. In order to protect these current sensors, the Bulk is used to protect them. Current sensors should only output 20mA current. Current sensors should not provide more current than 20mA. This current sensor must operate at a temperature greater than -25°C. Current sensors, however, should be set to 85°C maximum operating temperature. Current sensors are designed to measure currents of 550A. On this current sensor, there are 3 pins. The nominal current supplied by a current sensor should be 20mA. In a DC circuit, these sensors must provide voltages greater than 6V. In the DC circuit, however, the voltage supplied by the current sensors should not exceed 12V.
CSLA2EL Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 6V~12V
Sensing Current: 550A
Module, Single Pass Through Package
CSLA2EL Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLA2EL Current Sensors applications.
- Overcurrent protection
- Mobile applications
- Motor and load control
- Static converters for for DC motor drives
- General purpose inverters
- Electrical drives
- AC variable speed drives
- Battery supplied applications
- Battery supplied applications
- Static converters for DC motor drives
