CSLA2EN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Housing Material | PBT |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSLA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 6V~12V |
| Current Rating | 950A |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 20mA |
| Output Type | Voltage |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 6V |
| Polarization | Bidirectional |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Accuracy | 2 % |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Sensing Method | Hall Effect |
| Sensitivity | 2.3mV/N |
| For Measuring | AC/DC |
| Current - Sensing | 950A |
| RoHS Status | RoHS Compliant |
CSLA2EN Overview
For safety reasons, the current sensors are enclosed in Module, Single Pass Through packages. These current sensors are packaged in the Bulk to protect the devices from damage. This current sensor should be able to provide a maximum current of 20mA. Current sensors should not provide currents greater than 20mA. This current sensor must operate at a temperature greater than -25°C. However, the maximum operating temperature for the current sensors should be 85°C. Current sensors are designed to measure currents of 950A. This current sensor contains 3 pins. As a rule, current sensors should provide 20mA current.
CSLA2EN Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 6V~12V
Sensing Current: 950A
Module, Single Pass Through Package
CSLA2EN Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLA2EN Current Sensors applications.
- AC variabel speed drives and servo motor drives
- Electrical drives
- Overcurrent Detection
- DC motor drives
- OEM Current Sensing
- Switched Mode Power Supplies (SMPS)
- Proving Switch
- Battery chargers and systems
- Power Supplies for welding applications
- Switched Mode Power Supplies(SMPS)
