CSLA2GD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Housing Material | PBT |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSLA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Connector |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 6V~12V |
| Current Rating | 72A |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 20mA |
| Output Type | Voltage |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 5.4V |
| Polarization | Bidirectional |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Sensing Method | Hall Effect |
| Sensitivity | 32.7mV/N |
| For Measuring | AC/DC |
| Current - Sensing | 72A |
| Sensitivity (mV/A) | 32.7 mV/A |
| RoHS Status | RoHS Compliant |
CSLA2GD Overview
Module, Single Pass Through packages are used for the safety protection of current sensors. These current sensors are packaged in the Bulk to protect the devices from damage. Ideally, these current sensors should supply a maximum current of 20mA. A current sensor should not provide a current greater than 20mA. Ensure that the operating temperature of the current sensor is not lower than -25°C. Nevertheless, the current sensors should be set to 85°C as the maximum operating temperature. Current sensors have been designed for 72A current. On this current sensor, there are 3 pins. By definition, current sensors should provide a 20mA current.
CSLA2GD Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 6V~12V
Sensing Current: 72A
Module, Single Pass Through Package
CSLA2GD Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLA2GD Current Sensors applications.
- Switched Mode Power Supplies (SMPS)
- Frequency, Voltage, and Solar Inverters
- Industrial Monitoring and Control Systems
- Monitor Motor Operation
- Leakage Current Sensors
- Overcurrent Detection
- Proving Switch
- AC variable speed drives
- Static converters for DC motor drives
- Electrical drives
