CSNB121
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Housing Material | Polycarbonate |
| Operating Temperature | 0°C~70°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSN |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| Termination | Solder |
| Type | Hall Effect |
| Subcategory | Other Sensors/Transducers |
| Voltage - Supply | ±15V |
| Reach Compliance Code | unknown |
| Current Rating | 100A |
| Frequency | DC~150kHz |
| Output | Ratiometric, Current |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Nominal Supply Current | 10mA |
| Output Current | 25mA |
| Max Supply Current | 10mA |
| Accuracy | ±0.5% |
| Response Time | 1μs |
| Coil Resistance | 160Ohm |
| Sensor Type | Hall Effect, Closed Loop |
| Linearity | ±0.1% |
| Sensing Method | Hall Effect |
| For Measuring | AC/DC |
| Length | 40.5mm |
| Width | 19mm |
| RoHS Status | RoHS Compliant |
CSNB121 Overview
The current sensors are put into Module, Single Pass Through packages for safety protection. In order to protect these current sensors, the Bulk is used to protect them. A current sensor's supply current should not exceed 10mA. Current sensors have terminations of 3. Current sensors have been designed to measure current at 100A. In this current sensor, there are no pins. It is possible for the current sensors to provide 15V voltage when they are operating. The nominal current supplied by current sensors should be 10mA. Current sensors should output 25mA current.
CSNB121 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~70°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±15V
Frequency: DC~150kHz
Module, Single Pass Through Package
CSNB121 Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSNB121 Current Sensors applications.
- Battery supplied applications
- Overcurrent Detection
- Uninterruptible Power Supplies(UPS)
- Power Supplies for welding applications
- Leakage Current Sensors
- Power supply management
- OEM Current Sensing
- General purpose inverters
- Overcurrent protection
- Inverter and H-bridge current measurements
