CSNE151-010
| Parameters | |
|---|---|
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Coil Resistance | 110Ohm |
| Sensor Type | Hall Effect, Closed Loop |
| Linearity | ±0.2% |
| For Measuring | AC/DC |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 13 |
| Housing Material | PBT |
| Operating Temperature | 0°C~70°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSN |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 13 |
| Voltage - Supply | ±15V |
| Terminal Position | UNSPECIFIED |
| Terminal Form | UNSPECIFIED |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Current Rating | 36A |
| Frequency | DC~150kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Ratiometric, Current |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Polarization | Bidirectional |
| Nominal Supply Current | 10mA |
| Max Supply Current | 10mA |
| Accuracy | ±0.5% |
| Response Time | 1μs |
CSNE151-010 Overview
Safety precautions are taken by putting the current sensors in Module, Single Pass Through packages. As a precaution, these current sensors are packaged in the Bulk to protect them from damage. A current sensor should not provide a current greater than 10mA. It is noted that the current sensors have a termination of 13. A current sensor is designed for a current of 36A. On this current sensor, there are 13 pins. When the current sensors are in operation, they may produce a voltage of 15V. It is possible for these current sensors to supply voltages of 15V while in operation. Normally, current sensors should supply 10mA of current.
CSNE151-010 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~70°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±15V
Frequency: DC~150kHz
Module, Single Pass Through Package
CSNE151-010 Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSNE151-010 Current Sensors applications.
- Inverter and H-bridge current measurements
- Motor and load control
- Power Supplies for welding applications
- Electrical drives
- Battery supplied applications
- Continuity
- Home Automation
- General purpose inverters
- OEM Current Sensing
- Battery chargers and systems
