CSNE151
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 13 |
| Material | Polybutylene |
| Housing Material | PBT |
| Operating Temperature | 0°C~70°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSN |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | ±15V |
| Current Rating | 36A |
| Frequency | DC~150kHz |
| Output | Ratiometric, Current |
| Current - Supply (Max) | 10mA |
| Operating Supply Voltage | 15V |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Nominal Supply Current | 10mA |
| Output Current | 25mA |
| Max Supply Current | 10mA |
| Accuracy | ±0.5% |
| Response Time | 1μs |
| Coil Resistance | 110Ohm |
| Sensor Type | Hall Effect, Closed Loop |
| Linearity | ±0.2% |
| Max Supply Voltage (DC) | 15.75V |
| Min Supply Voltage (DC) | 14.25V |
| For Measuring | AC/DC |
| Current - Sensing | 36A |
| Length | 28mm |
| Width | 26mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Flammability Rating | UL94 V-0 |
CSNE151 Overview
Safety measures are taken to protect the current sensors by putting them in Module, Single Pass Through packages. For protection, these sensors are packaged in the Bulk. In these current sensors, the maximum output current should be 10mA. A current sensor's supply current should not exceed 10mA. It is essential that these current sensors work at a temperature above 0°C. Nevertheless, the maximum operating temperature should be set to 70°C. Current sensors are designed to detect 36A current. Current sensors have 13 pins. When the current sensors are operating, they could supply 15V. As a rule of thumb, current sensors are supposed to supply a current of 10mA. Current sensors should output 25mA current. A DC circuit cannot have a voltage below 14.25V supplied by these sensors. In the DC circuit, the voltage provided by the current sensors should not exceed 15.75V.
CSNE151 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~70°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±15V
Frequency: DC~150kHz
Sensing Current: 36A
Module, Single Pass Through Package
CSNE151 Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSNE151 Current Sensors applications.
- Battery supplied applications
- Power supplies for welding applications
- AC variable speed drives
- Switched Mode Power Supplies (SMPS)
- Continuity
- Closed-L oop DC- and AC-Current Sensor Modules
- Inverter and H-bridge current measurements
- Static converters for DC motor drives
- OEM Current Sensing
- Frequency, Voltage, and Solar Inverters
