Parameters |
Factory Lead Time |
1 Week |
Mount |
PCB |
Mounting Type |
Through Hole |
Package / Case |
Module, Single Pass Through |
Number of Pins |
3 |
Housing Material |
PBT |
Operating Temperature |
-40°C~85°C |
Packaging |
Bulk |
Published |
1998 |
Series |
CSN |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
±15V |
Current Rating |
180A |
Output |
Ratiometric, Current |
Current - Supply (Max) |
10mA |
Operating Supply Voltage |
15V |
Polarity |
Bidirectional |
Number of Channels |
1 |
Polarization |
Bidirectional |
Nominal Supply Current |
10mA |
Max Supply Current |
10mA |
Accuracy |
±0.5% |
Response Time |
0.5μs |
Coil Resistance |
100Ohm |
Sensor Type |
Hall Effect, Closed Loop |
For Measuring |
AC/DC |
Current - Sensing |
180A |
RoHS Status |
RoHS Compliant |
CSNF151 Overview
Current sensors are housed in Module, Single Pass Through packages to ensure their safety. A protective Bulk is placed over these current sensors in order to prevent damage to the devices. It is recommended that these current sensors supply a maximum current of 10mA. The current supplied by current sensors should not be higher than 10mA. To ensure that these current sensors work, the operating temperature cannot be less than -40°C. However, the maximum operating temperature for the current sensors should be set to 85°C. A current sensor is designed for a current of 180A. A current sensor like this has 3 pins. When the current sensors are in operation, they may produce a voltage of 15V. Normally, current sensors supply 10mA current.
CSNF151 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±15V
Sensing Current: 180A
Module, Single Pass Through Package
CSNF151 Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSNF151 Current Sensors applications.
- OEM Current Sensing
- Power Supplies for welding applications
- General purpose inverters
- Proving Switch
- Uninterruptible Power Supplies(UPS)
- Uninterruptable Power Supllies (UPS)
- Monitor Motor Operation
- AC variabel speed drives and servo motor drives
- DC and AC power monitoring
- Mobile applications