CSNF661
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Material | Polybutylene |
| Housing Material | PBT |
| Operating Temperature | -40°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSN |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| Voltage - Supply | ±12V~15V |
| Terminal Position | UNSPECIFIED |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Current Rating | 150A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Ratiometric, Current |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Polarization | Bidirectional |
| Nominal Supply Current | 10mA |
| Output Current | 100mA |
| Max Supply Current | 10mA |
| Accuracy | ±0.5% |
| Response Time | 0.5μs |
| Coil Resistance | 30Ohm |
| Sensor Type | Hall Effect, Closed Loop |
| Max Supply Voltage (DC) | 15V |
| Min Supply Voltage (DC) | 12V |
| For Measuring | AC/DC |
| Width | 36.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Flammability Rating | UL94 V-0 |
CSNF661 Overview
For safety purposes, the current sensors are housed in Module, Single Pass Through packages. The current sensors are packaged in the Bulk in order to prevent damage to the devices. Sensors should supply a current below 10mA. There are no terminations on the current sensors. Designed for 150A current, the current sensors are capable of measuring. It has 3 pins. As a rule, current sensors should provide 10mA current. Current sensors should output a value of 100mA. It is recommended that the voltage supplied by these sensors should not be lower than 12V ina DC circuit. As long as the DC circuit is not overvoltaged, the voltage supplied by the current sensors should not exceed 15V.
CSNF661 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±12V~15V
Module, Single Pass Through Package
CSNF661 Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSNF661 Current Sensors applications.
- Overcurrent protection
- General purpose inverters
- Monitor Motor Operation
- Home Automation
- Switched Mode Power Supplies (SMPS)
- Power supply management
- Overcurrent Detection
- DC motor drives
- OEM Current Sensing
- Uninterruptable Power Supllies (UPS)
