Parameters |
Mount |
Panel |
Mounting Type |
Through Hole |
Package / Case |
Module, Single Pass Through |
Number of Pins |
3 |
Housing Material |
Polycarbonate |
Operating Temperature |
-40°C~85°C |
Packaging |
Bulk |
Published |
1998 |
Series |
CSN |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
±12V~18V |
Current Rating |
1kA |
Output |
Ratiometric, Current |
Current - Supply (Max) |
14mA |
Operating Supply Voltage |
15V |
Polarity |
Bidirectional |
Number of Channels |
1 |
Polarization |
Bidirectional |
Nominal Supply Current |
14mA |
Max Supply Current |
14mA |
Accuracy |
±0.5% |
Response Time |
1μs |
Coil Resistance |
22Ohm |
Sensor Type |
Hall Effect, Closed Loop |
For Measuring |
AC/DC |
Current - Sensing |
1000A |
RoHS Status |
RoHS Compliant |
CSNM191-005 Overview
For safety reasons, the current sensors are packaged in Module, Single Pass Through packages. For protection, these current sensors are packaged in a Bulk. This current sensor should be able to provide a maximum current of 14mA. There should not be an increase in current supplied by current sensors above 14mA. To ensure proper operation of these current sensors, the operating temperature cannot be below -40°C. For the current sensors, however, the maximum operating temperature should be set to 85°C. Designed for 1kA current, the current sensors are capable of measuring. This current sensor contains 3 pins. When the current sensors operate, they could output 15V voltage. Accordingly, the current provided by current sensors should have a nominal value of 14mA.
CSNM191-005 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±12V~18V
Sensing Current: 1000A
Module, Single Pass Through Package
CSNM191-005 Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSNM191-005 Current Sensors applications.
- Power Supplies for welding applications
- Overcurrent Detection
- Continuity
- Overcurrent protection
- DC motor drives
- Leakage Current Sensors
- Closed-L oop DC- and AC-Current Sensor Modules
- Battery supplied applications
- Power supplies for welding applications
- Battery chargers and systems