Parameters |
Factory Lead Time |
1 Week |
Mount |
PCB |
Mounting Type |
Through Hole |
Package / Case |
Module, Single Pass Through |
Number of Pins |
3 |
Housing Material |
PBT |
Operating Temperature |
-40°C~85°C |
Packaging |
Bulk |
Published |
1998 |
Series |
CSN |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
Solder |
Type |
Hall Effect |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
±12V~15V |
Current Rating |
90A |
Frequency |
150kHz |
Output |
Ratiometric, Current |
Current - Supply (Max) |
10mA |
Polarity |
Bidirectional |
Number of Channels |
1 |
Max Supply Voltage |
15V |
Min Supply Voltage |
12V |
Polarization |
Bidirectional |
Nominal Supply Current |
10mA |
Output Current |
50mA |
Max Supply Current |
10mA |
Accuracy |
±0.5% |
Response Time |
0.5μs |
Coil Resistance |
30Ohm |
Hole Diameter |
13.5 mm |
Sensor Type |
Hall Effect, Closed Loop |
Max Frequency |
150kHz |
Linearity |
0.1 % |
Sensing Method |
Hall Effect |
Max Supply Voltage (DC) |
15V |
Min Supply Voltage (DC) |
12V |
For Measuring |
AC/DC |
Current - Sensing |
90A |
Height |
29.8mm |
Width |
36.5mm |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
CSNP661 Overview
For safety reasons, the current sensors are packaged in Module, Single Pass Through packages. A Bulk package protects these current sensors from damage. This current sensor should be able to provide a maximum current of 10mA. If the current supplied by the current sensor is greater than 10mA, then the sensor should be faulty. In order for these current sensors to function, the operating temperature cannot be lower than -40°C. It is recommended, however, to set the maximum operating temperature for the current sensors to 85°C. Current sensors are designed to detect 90A current. This current sensor has 3 pins. By definition, current sensors should provide a 10mA current. It is recommended that current sensors produce a 50mA current output. In a DC circuit, these sensors must provide voltages greater than 12V. Nevertheless, the DC circuit voltage should not exceed 15V when the current sensors are being used.
CSNP661 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±12V~15V
Frequency: 150kHz
Sensing Current: 90A
Module, Single Pass Through Package
CSNP661 Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSNP661 Current Sensors applications.
- Overcurrent protection
- Motor and load control
- Overcurrent Detection
- Battery chargers and systems
- Uninterruptable Power Supllies (UPS)
- Leakage Current Sensors
- Mobile applications
- Power Supplies for welding applications
- AC variable speed drives
- Battery supplied applications