CSNR151
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Housing Material | PBT |
| Operating Temperature | -40°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSN |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Solder |
| Type | Hall Effect |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | ±12V~15V |
| Current Rating | 200A |
| Output | Ratiometric, Current |
| Current - Supply (Max) | 14mA |
| Operating Supply Voltage | 15V |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Nominal Supply Current | 14mA |
| Max Supply Current | 14mA |
| Accuracy | ±0.5% |
| Response Time | 0.5μs |
| Coil Resistance | 100Ohm |
| Sensor Type | Hall Effect, Closed Loop |
| Sensing Method | Hall Effect |
| For Measuring | AC/DC |
| Current - Sensing | 200A |
| RoHS Status | RoHS Compliant |
CSNR151 Overview
To ensure safety, current sensors are encapsulated in Module, Single Pass Through packages. A Bulk is used to protect the current sensors against damage. This current sensor should be able to provide a maximum current of 14mA. It is recommended that current sensors provide a current that is not greater than 14mA. Ensure that the operating temperature of the current sensor is not lower than -40°C. Nevertheless, the maximum operating temperature should be set to 85°C. Current sensors have been designed for 200A current. On this current sensor, there are 3 pins. The current sensors could supply 15V voltage when they operate. As a rule of thumb, current sensors are supposed to supply a current of 14mA.
CSNR151 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±12V~15V
Sensing Current: 200A
Module, Single Pass Through Package
CSNR151 Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSNR151 Current Sensors applications.
- Battery chargers and systems
- Continuity
- Frequency, Voltage, and Solar Inverters
- Closed-L oop DC- and AC-Current Sensor Modules
- Switched Mode Power Supplies (SMPS)
- General purpose inverters
- Motor and load control
- DC and AC power monitoring
- Battery supplied applications
- Power supplies for welding applications
