CSNR161
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Housing Material | PBT |
| Operating Temperature | -40°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSN |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | ±12V~15V |
| Current Rating | 200A |
| Output | Ratiometric, Current |
| Current - Supply (Max) | 14mA |
| Operating Supply Voltage | 15V |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Nominal Supply Current | 14mA |
| Max Supply Current | 14mA |
| Accuracy | ±0.5% |
| Response Time | 0.5μs |
| Coil Resistance | 30Ohm |
| Sensor Type | Hall Effect, Closed Loop |
| Linearity | 0.1 % |
| For Measuring | AC/DC |
| Current - Sensing | 200A |
| RoHS Status | RoHS Compliant |
CSNR161 Overview
Safety precautions are taken by putting the current sensors in Module, Single Pass Through packages. The current sensors are enclosed in the Bulk to prevent them from being damaged. Ideally, these current sensors should supply a maximum current of 14mA. Current sensors should not supply current higher than 14mA. This current sensor must operate at a temperature greater than -40°C. However, the maximum operating temperature for the current sensors should be 85°C. Current sensors are designed for currents of 200A. As far as the current sensor is concerned, it has 3 pins. The current sensors could supply 15V voltage when they operate. By definition, current sensors should provide a 14mA current.
CSNR161 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±12V~15V
Sensing Current: 200A
Module, Single Pass Through Package
CSNR161 Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSNR161 Current Sensors applications.
- Switched Mode Power Supplies(SMPS)
- Power factor correction
- Battery chargers and systems
- Overcurrent protection
- Uninterruptible Power Supplies(UPS)
- Mobile applications
- Static converters for for DC motor drives
- Frequency, Voltage, and Solar Inverters
- Overcurrent Detection
- Battery supplied applications
