Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Number of Pins |
4 |
Housing Material |
Polybutylene |
Operating Temperature |
-25°C~55°C |
Published |
2010 |
Series |
CX-400 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
Cable |
Connector Type |
Cable |
Max Operating Temperature |
55°C |
Min Operating Temperature |
-25°C |
Voltage - Supply |
12V~24V |
Ingress Protection |
IP67 |
Output Configuration |
PNP - Open Collector |
Turn On Delay Time |
1 ms |
Response Time |
1ms |
Sensing Distance |
32.80' (10m) |
Sensing Method |
Through-Beam |
Max Supply Voltage (DC) |
24V |
Connection Method |
Connector, M12, 4POS |
Light Source |
Red LED |
Min Supply Voltage (DC) |
12V |
RoHS Status |
RoHS Compliant |
Ratings |
IP67 |
CX-411-P-J Overview
To make sure your photoelectric sensor is reliable, set its temperature to -25°C~55°C. If you want these electronic components to work, you need to apply 12V~24V. A photoelectric sensor should have a response time of 1ms. To make sure it's reliable, the photoelectric sensor works at -25°C. It is possible to operate on a reliable level at a temperature of 55°C. Photoelectric sensors work properly when the 4 pins are connected. The maximum voltage of 24V in DC circuit can be applied to the photoelectric sensor without damage. As low a voltage as possible can be applied to this photoelectric sensor, such as 12V.
CX-411-P-J Features
Sensing Distance: 32.80' (10m)
4 pins
Response Time: 1ms
Operating Temperature: -25°C~55°C
CX-400 Series
Maximal Supply Voltage (DC): 24V
Minimal Supply Voltage (DC): 12V
Turn On Delay Time: 1 ms
CX-411-P-J Applications
There are a lot of Panasonic Industrial Automation Sales CX-411-P-J Photoelectric Sensors applications.
- Measuring distance
- Contrast sensors
- Detecting colours
- Passive infrared sensors
- Luminescence sensors
- Zone scanners
- Counting small objects
- Entrance and gate
- Mechanical engineering
- detect objects