CX-442-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Number of Pins | 4 |
| Housing Material | Polybutylene |
| Operating Temperature | -25°C~55°C |
| Published | 2010 |
| Series | CX-400 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Connector |
| Max Operating Temperature | 55°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IP67 |
| Output Configuration | NPN - Open Collector |
| Turn On Delay Time | 1 ms |
| Response Time | 1ms |
| Sensing Distance | 3.937 (100mm) |
| Sensing Method | Reflective |
| Max Supply Voltage (DC) | 24V |
| Connection Method | Connector, M8, 4POS |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 12V |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
CX-442-Z Overview
It is recommended that the photoelectric sensor is set at -25°C~55°C to ensure reliable performance. To make these electronic components work, they should be supplied with 12V~24V voltage. Sensors with a response time of 1ms are ideal. To make sure it's reliable, the photoelectric sensor works at -25°C. Reliable operation is enabled by a maximum operating temperature of 55°C. This photoelectric sensor can only function properly if the 4 pins are connected. Photoelectric sensors can withstand voltages up to 24V in DC circuits. It can work at 0V, which is the lowest voltage possible for this type of sensor.
CX-442-Z Features
Sensing Distance: 3.937 (100mm)
4 pins
Response Time: 1ms
Operating Temperature: -25°C~55°C
CX-400 Series
Maximal Supply Voltage (DC): 24V
Minimal Supply Voltage (DC): 12V
Turn On Delay Time: 1 ms
CX-442-Z Applications
There are a lot of Panasonic Industrial Automation Sales CX-442-Z Photoelectric Sensors applications.
- Entrance and gate
- Automatic doors
- Checking objects on production lines or conveyors
- Luminescence sensors
- Mechanical engineering
- detect objects
- Zone scanners
- Detecting colours
- Monitoring bigger areas for objects with light grids
- Measuring distance
