CY2077FZXI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY2077 |
| Output | CMOS, TTL |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 45mA |
| Max Supply Current | 45mA |
| Frequency (Max) | 100MHz 133MHz |
| Input | Clock, Crystal |
| Ratio - Input:Output | 1:1 |
| Primary Clock/Crystal Frequency-Nom | 75MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Height | 950μm |
| Length | 3.1mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2077FZXI Overview
Clock generator is packaged in the way of Tube. The 8-TSSOP (0.173, 4.40mm Width) package includes this clock generator. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. 8 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 5V. In this case, Clock, Crystal is designed to be the input of the clock generator. An up to 100MHz 133MHz frequency is provided by this clock-based RF synthesizer. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. As long as you provide 3.3V 5V supply voltage, it will work. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with CMOS, TTL logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator component. In particular, this clock PLL is designed to be used with microprocessors. The related electronic parts of part number CY2077 are listed below. The frequency synthesizer has 8 pins that are available. In terms of the supply voltage, PLL clock can handle 5V volts. A frequency synthesizer with ALSO REQUIRES 3.3V SUPPLY features better clock signal output. The output frequency is magnified as high as possible with 1 signal outputs. This clock generator operation can supply up to 45mA of current.
CY2077FZXI Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 5V
Operating supply voltage of 5V
CY2077FZXI Applications
There are a lot of Cypress Semiconductor Corp CY2077FZXI Clock Generators applications.
- Camera systems
- Skew suppression
- Frequency shifting decodes
- DVD recorders
- Melting
- Modems
- Microwave radio
- Microprocessor clock multipliers
- Multi-function printers
- Jitter reduction
