banner_page

CY22050KFI

3.3V Clock Generator, Fanout Distribution 150MHz 166.6MHz CY22050 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.5V 3.3V Tube


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY22050KFI
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 268
  • Description: 3.3V Clock Generator, Fanout Distribution 150MHz 166.6MHz CY22050 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.5V 3.3V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Lead, Tin
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tube
Published 1999
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Type Clock Generator, Fanout Distribution
Additional Feature CAN ALSO OPERATE AT 2.5V SUPPLY
Subcategory Clock Generators
Voltage - Supply 2.5V 3.3V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 3.3V
Base Part Number CY22050
Output CMOS
Pin Count 16
Number of Outputs 6
Operating Supply Voltage 3.3V
Number of Circuits 1
Nominal Supply Current 45mA
Power Dissipation 380mW
Max Supply Current 45mA
Frequency (Max) 150MHz 166.6MHz
Input LVCMOS, LVTTL, Crystal
Ratio - Input:Output 1:6
Primary Clock/Crystal Frequency-Nom 133MHz
PLL Yes with Bypass
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Height 950μm
Length 5.1mm
Width 4.5mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

CY22050KFI Overview


As a clock IC, it uses the Tube package. Clock PLL is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. In it, there are 16 terminations to be found. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be LVCMOS, LVTTL, Crystal. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. It provides a maximum frequency of 150MHz 166.6MHz. With the Surface Mount, it is easy to install this electric component on the panel. Clock generator ic works with 2.5V 3.3V. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. The frequency synthesizer in this product is compatible with all levels of CMOS logic. This electronic component can be classified into Clock Generator, Fanout Distribution. In particular, this clock PLL is designed to be used with microprocessors. This part number CY22050 is related to the following electrical components. There are 16 pins on the frequency generator that are available for use. PLL clock can handle a voltage of 3.3V as its supply voltage. Clock generator can also be included into Clock Generators. In order to provide better clock signal output, this frequency synthesizer is equipped with CAN ALSO OPERATE AT 2.5V SUPPLY. 6 signal outputs are provided for enhancing output frequency as much as possible. This frequency synthesizer operates at a maximum current of 45mA.

CY22050KFI Features


Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY22050KFI Applications


There are a lot of Cypress Semiconductor Corp CY22050KFI Clock Generators applications.

  • Myriad digital applications
  • FSK demodulators
  • Bluetooth receivers
  • Antenna automatic tracking
  • Digital circuits
  • DVD recorders
  • Ultrasound diagnosis
  • Satellite receivers
  • Ports
  • High-speed communication applications

Write a review

Note: HTML is not translated!
    Bad           Good