CY22050KFZXC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE AT 2.5V SUPPLY |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22050 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Power Dissipation | 450mW |
| Max Supply Current | 45mA |
| Frequency (Max) | 166.6MHz 200MHz |
| Input | LVCMOS, LVTTL, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 133MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22050KFZXC Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. There is a clock generator embedded in the 16-TSSOP (0.173, 4.40mm Width) package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains 16 terminations that can be found in frequency synthesizer. To operate this time clock generator, 3.3V voltage should be applied. In this case, LVCMOS, LVTTL, Crystal is designed to be the input of the clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. Providing a maximum frequency of 166.6MHz 200MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. As long as you provide 2.5V 3.3V supply voltage, it will work. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. The RF synthesizer is compatible with CMOS logic levels. As far as electrical parts go, this component can be classified as a Clock Generator, Fanout Distribution component. In particular, this clock PLL is designed to be used with microprocessors. This part number CY22050 is related to the following electrical components. There are 16 pins on the frequency generator that are available for use. Supply voltage 3.3V is what time clock generator can handle. This clock generator can be classified as a kind of Clock Generators in general. CAN ALSO OPERATE AT 2.5V SUPPLY is included in this frequency generator to enhance clock signal output. 6 signal outputs are provided for enhancing output frequency as much as possible. At frequencies of 200MHz, RF synthesizer achieves high efficiency. During these clock generator operations, the maximum current supplied reaches 45mA.
CY22050KFZXC Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22050KFZXC Applications
There are a lot of Cypress Semiconductor Corp CY22050KFZXC Clock Generators applications.
- Signal generator
- Skew suppression
- Televisions
- Pulsed digital systems
- DVD recorders
- Telecommunication systems
- VSAT (Small Ground Satellite Station)
- Coherent carrier tracking
- Microwave radio
- Multi-function printers
