banner_page

CY22050KFZXI

Clock Generator, Fanout Distribution 150MHz 166.6MHz CY22050 Clock Generators 16-TSSOP (0.173, 4.40mm Width) Surface Mount 2.5V 3.3V Tube


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY22050KFZXI
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 787
  • Description: Clock Generator, Fanout Distribution 150MHz 166.6MHz CY22050 Clock Generators 16-TSSOP (0.173, 4.40mm Width) Surface Mount 2.5V 3.3V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold, Tin
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Supplier Device Package 16-TSSOP
Operating Temperature -40°C~85°C
Packaging Tube
Published 1999
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Type Clock Generator, Fanout Distribution
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 2.5V 3.3V
Frequency 166.6MHz
Base Part Number CY22050
Output CMOS
Number of Outputs 6
Operating Supply Voltage 3.3V
Number of Elements 1
Number of Circuits 1
Max Supply Voltage 3.465V
Min Supply Voltage 3.135V
Nominal Supply Current 45mA
Power Dissipation 380mW
Max Supply Current 45mA
Frequency (Max) 150MHz 166.6MHz
Input LVCMOS, LVTTL, Crystal
Ratio - Input:Output 1:6
PLL Yes with Bypass
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Height 950μm
Length 5.1mm
Width 4.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY22050KFZXI Overview


Clock generator is packaged in the way of Tube. The 16-TSSOP (0.173, 4.40mm Width) package includes this clock generator. As the Clock PLL's input, LVCMOS, LVTTL, Crystal is designed to be used in order to generate the clock signal. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Providing a maximum frequency of 150MHz 166.6MHz, this clock-based RF synthesizer is suitable for a variety of applications. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock PLL works with 2.5V 3.3V supply voltage provided. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. The RF synthesizer is compatible with CMOS logic levels. As far as electrical parts go, this component can be classified as a Clock Generator, Fanout Distribution component. This part number is related to its related electronic parts. There is an available 16 pin on the clock generators. There are -40°C operations available on this frequency generator and it operates at low temperatures. Despite its attenuated performance, this frequency synthesizer can last at 85°C. In terms of the supply voltage, PLL clock can handle 3.3V volts. The output frequency can be amplified as high as possible with its 6 signal outputs. This clock generator cannot be powered by voltages higher than 3.465V. PLLs have a minimum supply voltage limit of 3.135V. At frequencies of 166.6MHz, RF synthesizer achieves high efficiency. This is a 1-element clock generator with low jitter performance. This clock generator operation can supply up to 45mA of current.

CY22050KFZXI Features


Available in the 16-TSSOP (0.173, 4.40mm Width)
Operating supply voltage of 3.3V

CY22050KFZXI Applications


There are a lot of Cypress Semiconductor Corp CY22050KFZXI Clock Generators applications.

  • Wireless handsets
  • Microprocessor clock multipliers
  • Carrier synchronization in wired communication
  • Phase modulation cellular systems
  • Fiber Channel
  • Automatic control
  • Multi-function printers
  • Wireless infrastructure
  • Camera systems
  • Cell phones

Write a review

Note: HTML is not translated!
    Bad           Good