banner_page

CY22150FZXCT

3.3V Clock Generator, Fanout Distribution 200MHz CY22150 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.375V~3.465V Tape & Reel (TR)


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY22150FZXCT
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 493
  • Description: 3.3V Clock Generator, Fanout Distribution 200MHz CY22150 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.375V~3.465V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Published 2002
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Type Clock Generator, Fanout Distribution
Terminal Finish Matte Tin (Sn)
Subcategory Clock Generators
Voltage - Supply 2.375V~3.465V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number CY22150
Output CMOS
Pin Count 16
Number of Outputs 6
Operating Supply Voltage 3.3V
Number of Circuits 1
Power Dissipation 450mW
Frequency (Max) 200MHz
Input LVCMOS, LVTTL, Crystal
Ratio - Input:Output 1:6
Primary Clock/Crystal Frequency-Nom 30MHz
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Duty Cycle 50 %
Length 5mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY22150FZXCT Overview


The Tape & Reel (TR) method is used for packaging clock ICs. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. It contains 16 terminations that can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. In this case, LVCMOS, LVTTL, Crystal is designed to be the input of the clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. There is a maximum frequency of 200MHz Max with this clock-based frequency generator. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. As long as there are 2.375V~3.465V supply voltages provided, clock generator ic should work. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. I would like to present to you a frequency synthesizer that is compatible with CMOS logic levels. It has been classified as a Clock Generator, Fanout Distribution electronic part, which means that it is a semiconductor. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. The related electronic parts of part number CY22150 are listed below. The clock PLL has 16 pins that are available. The supply voltage should be maintained at 3.3V for high efficiency. Clock Generators-type frequency generators are usually classified as this type. The frequency synthesizer features 6 signal outputs to ensure as high a frequency as possible.

CY22150FZXCT Features


Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY22150FZXCT Applications


There are a lot of Cypress Semiconductor Corp CY22150FZXCT Clock Generators applications.

  • Laptops
  • Jitter reduction
  • Threshold extension
  • High-speed communication applications
  • Mobile telephones
  • Computers to manage memory cards
  • Integrated phase noise in aerospace systems
  • Deep space exploration
  • Microwave point-to-point systems
  • Camera systems

Write a review

Note: HTML is not translated!
    Bad           Good