CY22150FZXI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 166.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22150 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, Serial |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Power Dissipation | 380mW |
| Input | LVCMOS, LVTTL, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 30MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Duty Cycle | 50 % |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22150FZXI Overview
As a clock IC, PLLs is packaged using the Tube method. There is a clock generator embedded in the 16-TSSOP (0.173, 4.40mm Width) package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As a result, frequency synthesizers can be found to contain 16 terminations. The clock generator ic should be grounded with a voltage of 3.3V. There is a Clock PLL called LVCMOS, LVTTL, Crystal which is designed to be the input to this clock generator. To access the electronic component's full performance, 1 circuits are implemented. Surface Mount-slots make it easy to mount this electronic component on panels. There are 2.375V~3.465V available for use with this clock PLL. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. As the name suggests, this is a clock generator that is compatible with CMOS logic levels. A Clock Generator, Fanout Distribution is a classification for the electronic part in question. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. This part number CY22150 is related to the following electrical components. It is possible to connect to the frequency generators via 16 pins. The maximum supply voltage that clock generator can handle is 3.3V. As a result, it is commonly classified as a type of Clock Generators clock PLL. The output frequency can be amplified as high as possible with its 6 signal outputs. By operating at a frequency of 166.6MHz, frequency generator is able to achieve high efficiency.
CY22150FZXI Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22150FZXI Applications
There are a lot of Cypress Semiconductor Corp CY22150FZXI Clock Generators applications.
- Digital logic circuits
- Carrier synchronization in wired communication
- Bluetooth receivers
- Peripheral devices
- Cable television converter boxes
- Precision auxiliary angle deflection measurement
- Signal analyzer
- Quenching?
- GPS systems
- Signal modulation and demodulation
