CY22150FZXIT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22150 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Power Dissipation | 380mW |
| Frequency (Max) | 166.6MHz |
| Input | LVCMOS, LVTTL, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 30MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Duty Cycle | 50 % |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22150FZXIT Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains a total of 16 terminations within RF synthesizer. Basically, this time clock generator needs a voltage of 3.3V. This clock generator receives its inputs from LVCMOS, LVTTL, Crystal, which is designed to be the clock source. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 166.6MHz. The Surface Mount allows this electrical component to be easily installed on the panel. This clock PLL works with a supply voltage of 2.375V~3.465V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. The frequency synthesizer in this product is compatible with all levels of CMOS logic. It has been classified as a Clock Generator, Fanout Distribution electronic part, which means that it is a semiconductor. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. According to the base part number, its related parts can be founded. There are 16 pins on the frequency generators that are available for use. Electronic frequency generator can handle voltages up to 3.3V. Clock Generators-type frequency generators are usually classified as this type. Clock PLL is facilitated with 6 signal outputs to magnify output frequency as high as possible.
CY22150FZXIT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22150FZXIT Applications
There are a lot of Cypress Semiconductor Corp CY22150FZXIT Clock Generators applications.
- Bluetooth receivers
- Infotainment systems
- Local oscillator source in receiver
- Aerospace and defense
- Modems
- Microwave point-to-point systems
- Satellite navigation communication
- FM demodulation networks for FM operations
- Cable television converter boxes
- High-speed optical transport network (OTN)
