CY22150KFZXC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22150 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Power Dissipation | 450mW |
| Max Supply Current | 45mA |
| Input | LVCMOS, LVTTL, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 30MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Duty Cycle | 50 % |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22150KFZXC Overview
As a clock IC, it uses the Tube package. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As a result, frequency synthesizers can be found to contain 16 terminations. This time clock generator should be voltaged at 3.3V. The input of this clock generator is designed to be LVCMOS, LVTTL, Crystal. To access the full performance of the electronic component, 1 circuits are implemented. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 2.375V~3.465V provided with this RF synthesizer. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. CMOS is designed for clock generator's output. It is possible to classify this electronic component as a Clock Generator, Fanout Distribution. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. The related electrical components for the base part number CY22150 can be found below. There is a 16 pin that is available on the digital clock generator. There is a maximum supply voltage of 3.3V that frequency generators can handle. In general, this clock PLL is considered a Clock Generators device. The frequency synthesizer features 6 signal outputs to ensure as high a frequency as possible. Frequency generator is able to reali200MHze high efficiency when operating at a frequency of 200MHz. This frequency synthesizer operates at a maximum current of 45mA.
CY22150KFZXC Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22150KFZXC Applications
There are a lot of Cypress Semiconductor Corp CY22150KFZXC Clock Generators applications.
- PMR (Professional Mobile Radio)
- FSK demodulators
- Modems
- Sampling clocks for ADC and DAC
- Cellular/4G
- Simple clock clean-up circuits
- Electronic equipment
- Wireless base station for LTE, LTE-advanced
- FPGA and processor clocks
- Threshold extension
