Parameters |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Clock Generators |
Voltage - Supply |
2.375V~3.465V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
CY22150 |
Output |
CMOS |
Pin Count |
16 |
Number of Outputs |
6 |
Operating Supply Voltage |
3.3V |
Number of Circuits |
1 |
Nominal Supply Current |
45mA |
Power Dissipation |
380mW |
Max Supply Current |
45mA |
Frequency (Max) |
166.6MHz |
Input |
LVCMOS, LVTTL, Crystal |
Ratio - Input:Output |
1:6 |
Primary Clock/Crystal Frequency-Nom |
30MHz |
PLL |
Yes |
Differential - Input:Output |
No/No |
Divider/Multiplier |
Yes/No |
Duty Cycle |
50 % |
Height |
950μm |
Length |
5.1mm |
Width |
4.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY22150KFZXI Overview
In order to package it as a clock IC, the Tube package is used. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. As you can see, it consists of 16 terminations. To operate this time clock generator, 3.3V voltage should be applied. A clock generator's input is called LVCMOS, LVTTL, Crystal and it is designed as the input for this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. There is a maximum frequency of 166.6MHz Max with this clock-based frequency generator. With the Surface Mount, it is easy to install this electric component on the panel. In terms of supply voltage, RF synthesizer works with 2.375V~3.465V. Based on test statistics, ambient temperature should be set at -40°C~85°C. The RF synthesizer is compatible with CMOS logic levels. It has been classified as a Clock Generator, Fanout Distribution electronic part, which means that it is a semiconductor. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. Related electrical parts can be found for the base part number CY22150. There are 16 pins that are available on the clock PLL. The supply voltage should be maintained at 3.3V for high efficiency. As such, it is often referred to as a kind of Clock Generators clock PLL. Clock PLL is configured with 6 output. This clock generator operation can supply up to 45mA of current.
CY22150KFZXI Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22150KFZXI Applications
There are a lot of Cypress Semiconductor Corp CY22150KFZXI Clock Generators applications.
- Sampling clocks for ADC and DAC
- Mechanical devices
- MRI
- Walkie-talkies
- Melting
- Broadcast communication
- Picocells, femtocells and small cells
- Symbol synchronization
- Radio receivers
- Main oscillator in receiver