CY22392FXC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22392 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 100mA |
| Nominal Supply Current | 100mA |
| Input | LVTTL, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 166MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Max Duty Cycle | 55 % |
| Divider/Multiplier | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22392FXC Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. A Clock PLL is included with the 16-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains a total of 16 terminations within RF synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be LVTTL, Crystal. Using 1 circuits, the electronic part's full performance can be accessed. PLL clock is mounted in the way of Surface Mount. Clock generators should operate with the voltage supply of 3.135V~3.465V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. LVCMOS is designed for clock generator's output. It is possible to classify this electronic component as a Clock Generator, Fanout Distribution. Microprocessor-specific clock PLL with 16 bits. It is possible to find its related electronic parts by searching for the base part number CY22392. PF synthesizers is equipped with 16 pins. The supply voltage should be maintained at 3.3V for high efficiency. And basically, this clock generator is often classified as a kind of Clock Generators. Clock PLL is facilitated with 6 signal outputs to magnify output frequency as high as possible. Using a frequency of 200MHz allows frequency synthesizer to achieve high efficiencies. Time clock generator requires a supply current of 100mA to fully function. This is a 3-element clock generator with low jitter performance.
CY22392FXC Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22392FXC Applications
There are a lot of Cypress Semiconductor Corp CY22392FXC Clock Generators applications.
- Ultrasound diagnosis
- Cell phones
- DVD add-on cards for multimedia PCs
- Pulsed digital systems
- Small signal recovery
- Communication infrastructure
- Antenna automatic tracking
- Line cards used in telephone exchange
- Frequency synthesis
- Cellular/4G
