CY22392FXI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22392 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Nominal Supply Current | 100mA |
| Frequency (Max) | 166MHz |
| Input | LVTTL, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 150MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22392FXI Overview
As a clock IC, it is packaged by the Tube method. A Clock PLL is included with the 16-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As a result of this, we can find 16 terminations. This clock generator ic should receive a voltage of 3.3V. LVTTL, Crystal is designed for clock generator's input. To access the full performance of the electronic component, 1 circuits are implemented. The frequency generator has a maximum frequency of 166MHz. The Surface Mount allows this electrical component to be easily installed on the panel. There are 3.135V~3.465V available for use with this clock PLL. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. LVCMOS is designed for clock generator's output. As far as this electronic part is concerned, it can be classified as a Clock Generator, Fanout Distribution component. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. This part number CY22392 is related to the following electrical components. There are 16 pins on the frequency generator that are available for use. PLL clock can handle a voltage of 3.3V as its supply voltage. The clock PLL is generally classified as a Clock Generators device. 6 signal outputs enable clock PLL to magnify output frequency as high as possible. By operating at a frequency of 200MHz, RF synthesizer is able to reali200MHze high efficiency. This is a 3-element clock generator with low jitter performance.
CY22392FXI Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22392FXI Applications
There are a lot of Cypress Semiconductor Corp CY22392FXI Clock Generators applications.
- PCI express cards
- Automatic test equipment
- Multiplexing communication
- Motor speed controls
- Main oscillator in receiver
- VSAT (Small Ground Satellite Station)
- Set-top boxes
- Instrument
- Symbol synchronization
- Satellite navigation communication
