Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
172.98879mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Published |
2010 |
Series |
Automotive, AEC-Q100 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution |
Voltage - Supply |
3.135V~3.465V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Supply Voltage |
3.3V |
Output |
CMOS |
Number of Outputs |
6 |
Operating Supply Voltage |
3.3V |
Number of Circuits |
1 |
Operating Supply Current |
100mA |
Frequency (Max) |
166MHz |
Input |
LVTTL, Crystal |
Ratio - Input:Output |
1:6 |
Primary Clock/Crystal Frequency-Nom |
150MHz |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Max Duty Cycle |
60 % |
Divider/Multiplier |
Yes/No |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
CY22393FXE Overview
Clock generator is packaged in the way of Tube. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. It contains 16 terminations that can be found in frequency synthesizer. This time clock generator should be voltaged at 3.3V. LVTTL, Crystal is designed as this clock generator's input. It is possible to access the full performance of the electrical part by implementing 1 circuits. RF synthesizers based on this clock provide frequencies up to 166MHz maximum. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock generator ic works with 3.135V~3.465V. Using the test statistics, we estimate that the ambient temperature should be -40°C~125°C. The frequency synthesizer in this product is compatible with all levels of CMOS logic. It has been classified as a Clock Generator, Fanout Distribution electronic part, which means that it is a semiconductor. There is an available 16 pin on the clock generators. RF synthesizers can handle a voltage of 3.3V as the supply voltage. There is an electronic part in this series that belongs to the Automotive, AEC-Q100 family. The frequency synthesizer features 6 signal outputs to ensure as high a frequency as possible. Time clock generator requires a supply current of 100mA to fully function.
CY22393FXE Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22393FXE Applications
There are a lot of Cypress Semiconductor Corp CY22393FXE Clock Generators applications.
- Line cards used in telephone exchange
- FPGA and processor clocks
- Test and instrumentation equipment
- Coherent detection of the signal
- Frequency Modulation (FM) stereo decoders
- Cellular/4G
- Carrier synchronization in wired communication
- Camera systems
- Picocells, femtocells and small cells
- Multi-function printers