Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2004 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Last Time Buy |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Clock Generators |
Voltage - Supply |
2.375V~3.465V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY22395 |
Output |
CMOS, LVCMOS |
Pin Count |
16 |
Number of Outputs |
5 |
Operating Supply Voltage |
3.3V |
Number of Elements |
3 |
Number of Circuits |
1 |
Nominal Supply Current |
50mA |
Frequency (Max) |
133MHz 166MHz |
Input |
LVTTL, Crystal |
Ratio - Input:Output |
1:5 |
Primary Clock/Crystal Frequency-Nom |
150MHz |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Divider/Multiplier |
Yes/No |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY22395FXI Overview
Tube-method packaging is used for clock ICs. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. 16 terminations can be found in frequency generators. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. LVTTL, Crystal is designed as this clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133MHz 166MHz. With the Surface Mount, it is easy to install this electric component on the panel. Clock PLL works with 2.375V~3.465V supply voltage provided. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. It's compatible with CMOS, LVCMOS logic levels. It has been classified as a Clock Generator, Fanout Distribution electronic part, which means that it is a semiconductor. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. You can find related electrical components to the base part number CY22395. There is a 16 pin that is available on the frequency synthesizers. In terms of the supply voltage, PLL clock can handle 3.3V volts. Clock Generators-type frequency generators are usually classified as this type. 5 signal outputs enable clock PLL to magnify output frequency as high as possible. I have designed a clock PLL with 3 elements and low jitter performance.
CY22395FXI Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22395FXI Applications
There are a lot of Cypress Semiconductor Corp CY22395FXI Clock Generators applications.
- Electronic equipment
- Signal generator
- Laptops
- Sampling clocks for ADC and DAC
- Instrument
- Multi-function printers
- Automatic control
- Antenna automatic tracking
- Microwave radio
- Signal demodulation