CY22395FXIT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22395 |
| Output | CMOS, LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Frequency (Max) | 133MHz 166MHz |
| Input | LVTTL, Crystal |
| Ratio - Input:Output | 1:5 |
| Primary Clock/Crystal Frequency-Nom | 150MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22395FXIT Overview
Tape & Reel (TR)-method packaging is used for clock ICs. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. It contains a total of 16 terminations within RF synthesizer. For this clock generator ic, a voltage of 3.3V is required. In this clock generator, LVTTL, Crystal is used as the input to the clock. 1 circuits are implemented to access the electronic component's full performance. An upper frequency limit of 133MHz 166MHz Max can be achieved with this clock-based frequency synthesizer. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock generator ic works with 2.375V~3.465V. Based on test statistics, ambient temperature should be set at -40°C~85°C. CMOS, LVCMOS logic levels are supported by this RF synthesizer. A Clock Generator, Fanout Distribution is a classification for the electronic part in question. Clock PLL is equipped with 16 pin count. This part number CY22395 is related to the following electrical components. The frequency synthesizer has 16 pins that are available. There is a maximum supply voltage of 3.3V that clock generator can handle. Clock Generators-type frequency generators are usually classified as this type. The output frequency can be magnified as high as possible with the assistance of 5 signal outputs. IC clock generator consists of 3 elements.
CY22395FXIT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22395FXIT Applications
There are a lot of Cypress Semiconductor Corp CY22395FXIT Clock Generators applications.
- FPGA and processor clocks
- Test equipment
- Signal frequency synthesis circuits
- Deep space exploration
- Modems
- Digital HDTV systems
- Wi-Fi routers
- Frequency Modulation (FM) stereo decoders
- Pulsed digital systems
- Coherent carrier tracking
