CY22800KFXI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Generators |
| Voltage - Supply | 3.14V~3.47V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22800 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 3 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Frequency (Max) | 166MHz |
| Input | Clock, Crystal |
| Ratio - Input:Output | 1:3 |
| Primary Clock/Crystal Frequency-Nom | 100MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Height | 1.48mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22800KFXI Overview
Clock ICs are packaged using the Tube method. A Clock PLL is included with the 8-SOIC (0.154, 3.90mm Width) package. When reflowed, this frequency generator can withstand a maximum temperature of 260. 8 terminations can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, Clock, Crystal is designed to be the input of the clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. The frequency generator has a maximum frequency of 166MHz. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. This clock PLL works with a supply voltage of 3.14V~3.47V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. The RF synthesizer is compatible with LVCMOS logic levels. As far as electrical parts go, this component can be classified as a Clock Generator, Fanout Distribution component. In this IC, a 8-bit frequency generator is designed specifically for use in microprocessors. The related electrical components for the base part number CY22800 can be found below. There is a 8 pin that is available on the frequency synthesizers. The supply voltage should be maintained at 3.3V for high efficiency. This clock generator can be classified as a kind of Clock Generators in general. The output frequency can be magnified as high as possible with the assistance of 3 signal outputs.
CY22800KFXI Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22800KFXI Applications
There are a lot of Cypress Semiconductor Corp CY22800KFXI Clock Generators applications.
- Frequency Modulation (FM) stereo decoders
- Antenna automatic tracking
- Media broadcast servers
- PMR (Professional Mobile Radio)
- Simple clock clean-up circuits
- Skew suppression
- Notebooks
- Frequency synthesis
- Signal modulation and demodulation
- FPGA and processor clocks
