CY22801KFXCT
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22801 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 30mA |
| Frequency (Max) | 200MHz |
| Input | Clock, Crystal |
| Ratio - Input:Output | 1:3 |
| Primary Clock/Crystal Frequency-Nom | 30MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Generators |
| Voltage - Supply | 3.14V~3.47V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
CY22801KFXCT Overview
This clock IC is packaged using the Tape & Reel (TR) method. 8-SOIC (0.154, 3.90mm Width) contains this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. It contains 8 terminations that can be found in frequency synthesizer. For this clock generator ic, a voltage of 3.3V is required. A clock generator's input is called Clock, Crystal and it is designed as the input for this clock generator. 1 circuits are used to achieve clock PLL's superior flexibility. This clock-based frequency generator provides a frequency up to 200MHz Max. With the Surface Mount, it is easy to install this electric component on the panel. As long as there are 3.14V~3.47V supply voltages provided, clock generator ic should work. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. LVCMOS logic levels are supported by this RF synthesizer. It has been classified as a Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator electronic part, which means that it is a semiconductor. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. The related electrical components for the base part number CY22801 can be found below. PLL is designed with 8 pins. The supply voltage should be maintained at 3.3V for high efficiency. Clock generator can also be included into Clock Generators. 3 signal outputs maximi3e the output frequency. For the RF synthesizer to function properly, a supply current of 30mA must be provided.
CY22801KFXCT Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22801KFXCT Applications
There are a lot of Cypress Semiconductor Corp CY22801KFXCT Clock Generators applications.
- Mixed mode (analog and digital) applications
- Multiplexing communication
- 1 Gigabit Ethernet
- Cell phones
- Bluetooth receivers
- Wide area power system
- GPS systems
- Pulsed digital systems
- VSAT (Small Ground Satellite Station)
- Phase modulation cellular systems
