CY2292FXC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Generators |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 90MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2292 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 70mA |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 66.6MHz 90MHz |
| Input | Clock, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 30MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Height | 1.48mm |
| Length | 9.98mm |
| Width | 3.98mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2292FXC Overview
In order to package it as a clock IC, the Tube package is used. The 16-SOIC (0.154, 3.90mm Width) package contains this clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. It contains a total of 16 terminations within RF synthesizer. Basically, a voltage of 5V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be Clock, Crystal. To access the electronic component's full performance, 1 circuits are implemented. It provides a maximum frequency of 66.6MHz 90MHz. Surface Mount-slots make it easy to mount this electronic component on panels. As far as the supply voltage is concerned, clock PLL can be used with 3.3V 5V. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. In this case, we are dealing with a frequency synthesizer that can be used with CMOS logic levels. A Clock Generator, Fanout Distribution is a classification for the electronic part in question. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. You can find related electrical components to the base part number CY2292. The clock PLL has 16 pins that are available. The maximum supply voltage that clock generator can handle is 3.3V. Clock generator can also be included into Clock Generators. 6 signal outputs enable clock PLL to magnify output frequency as high as possible. At 90MHz, frequency synthesizer achieves high efficiency. Time clock generator requires a supply current of 70mA to fully function. An 8-element clock PLL with a low jitter performance is available on this page. This RF synthesizer operation requires a maximum current of 100mA.
CY2292FXC Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 5V
Operating supply voltage of 3.3V
CY2292FXC Applications
There are a lot of Cypress Semiconductor Corp CY2292FXC Clock Generators applications.
- Line cards used in telephone exchange
- Clock signals to the high-speed Digital RF circuits
- Medical equipment
- Signal analyzer
- Multiplexing communication
- Wide area power system
- Smartphones
- CB radios
- Microwave radio
- Test and instrumentation equipment
