Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
1996 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Clock Multiplier, Fanout Distribution |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY2300 |
Output |
LVCMOS |
Pin Count |
8 |
Number of Outputs |
4 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
45mA |
Frequency (Max) |
166.67MHz |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:4 |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.2 ns |
Propagation Delay (tpd) |
0.2 ns |
Divider/Multiplier |
Yes/Yes |
Same Edge Skew-Max (tskwd) |
0.2 ns |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY2300SXC Overview
In order to package it as a clock IC, the Tube package is used. Embedded in the 8-SOIC (0.154, 3.90mm Width) package is this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result of this, we can find 8 terminations. The clock generator ic should be grounded with a voltage of 3.3V. There is a Clock PLL called LVCMOS, LVTTL which is designed to be the input to this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 166.67MHz. The Surface Mount allows this electrical component to be easily installed on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageFor safety reasons, this frequency generator's supply voltage should remain above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. This electronic component can be classified as a Clock Multiplier, Fanout Distribution. There is a 8-bit clock-generating IC built specifically for microprocessors in this frequency generator. The related electronic parts of part number CY2300 are listed below. It is possible to connect to the PLL via 8 pins. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. In general, this clock PLL is considered a Clock Drivers device. The frequency synthesizer features 4 signal outputs to ensure as high a frequency as possible. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns.
CY2300SXC Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2300SXC Applications
There are a lot of Cypress Semiconductor Corp CY2300SXC Clock Generators applications.
- Radio receivers
- Laptops
- Microwave radio
- Space communucation
- Picocells, femtocells and small cells
- Simple clock clean-up circuits
- Test and instrumentation equipment
- Clock synchronization
- Signal modulation and demodulation
- Broadcast communication