CY2300SXCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Clock Multiplier, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2300 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 166.67MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:4 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.2 ns |
| Propagation Delay (tpd) | 0.2 ns |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2300SXCT Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. This clock generator is embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. In it, there are 8 terminations to be found. To operate this time clock generator, 3.3V voltage should be applied. LVCMOS, LVTTL is designed as this clock generator's input. 1 circuits are used to achieve clock PLL's superior flexibility. RF synthesizers based on this clock provide frequencies up to 166.67MHz maximum. PLL clock is mounted in the way of Surface Mount. It would be possible to supply this clock PLL with 3.6V of power. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. Clock PLL works with 3V~3.6V supply voltage provided. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. LVCMOS logic levels are supported by this RF synthesizer. This is an electronic part that can be classified as a Clock Multiplier, Fanout Distribution in this case. There is a 8-bit clock-generating IC built specifically for microprocessors in this frequency generator. The related electrical components for the base part number CY2300 can be found below. A 8 pin is available on the PLL. The maximum supply voltage that analog clock generator can handle is 3.3V. This clock generator can be classified as a kind of Clock Drivers in general. 4 signal outputs allow for maximi4ation of output frequency. This clock generator offers low timing skew at 0.2 ns Max.
CY2300SXCT Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2300SXCT Applications
There are a lot of Cypress Semiconductor Corp CY2300SXCT Clock Generators applications.
- Frequency Modulation (FM) stereo decoders
- Symbol synchronization
- Wireless base station for LTE, LTE-advanced
- DVD recorders
- Cellular/4G
- VSAT (Small Ground Satellite Station)
- Wireless infrastructure
- Main oscillator in receiver
- Communication infrastructure
- Microwave radio
