CY2304SC-1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CY2304 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:4 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Number of True Outputs | 4 |
| RoHS Status | Non-RoHS Compliant |
CY2304SC-1 Overview
This clock IC is packaged using the Tube method. There is a clock generator embedded in the 8-SOIC (0.154, 3.90mm Width) package. A maximum temperature of 220 can be sustained by this clock generator ic during reflowing. It contains a total of 8 terminations within RF synthesizer. To operate this time clock generator, 3.3V voltage should be applied. In this case, Clock is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. Providing a maximum frequency of 133.3MHz, this clock-based RF synthesizer is suitable for a variety of applications. PLL clock is mounted in the way of Surface Mount. It would be possible to supply this clock PLL with 3.6V of power. The supply voltage (Vsup) should be kept above 3V for normal operation. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. In this IC, a 8-bit frequency generator is designed specifically for use in microprocessors. This part number CY2304 is related to the following electrical components. There is an available 8 pin on the clock generators. The supply voltage should be maintained at 3.3V for high efficiency. At 0.2 ns Max, this clock generator offers low timing skew. There are 4 pins configured for enabling high true outputs on this clock generator.
CY2304SC-1 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs
CY2304SC-1 Applications
There are a lot of Cypress Semiconductor Corp CY2304SC-1 Clock Generators applications.
- Various decoding circuits
- Microwave backhaul IF
- Signal modulation and demodulation
- Digital logic circuits
- Digital circuits
- Microprocessor clock multipliers
- Camera systems
- Clock recovery
- Aerospace and defense
- Cell phones
