Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Matte Tin (Sn) |
Technology |
CMOS |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Frequency |
133.33MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY2304 |
Pin Count |
8 |
Number of Outputs |
4 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
45mA |
Frequency (Max) |
133.3MHz |
Output Characteristics |
3-STATE |
Input |
Clock |
Ratio - Input:Output |
1:4 |
PLL |
Yes |
Differential - Input:Output |
No/No |
Divider/Multiplier |
Yes/Yes |
Same Edge Skew-Max (tskwd) |
0.5 ns |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY2304SXC-2 Overview
The Tube method is used for packaging clock ICs. This clock generator is embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result, frequency synthesizers can be found to contain 8 terminations. The clock generator ic should be grounded with a voltage of 3.3V. This clock generator receives its inputs from Clock, which is designed to be the clock source. A total of 1 circuits are implemented to access the full performance of the electrical part. 133.3MHz is the maximal value for normal operation. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would be possible to supply this clock PLL with 3.6V of power. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. It is a 8-bit IC that is designed for microprocessors specifically. CY2304 is the base part number for finding related electronic parts. The frequency synthesizer has 8 pins that are available. Time clock generator can handle a voltage of 3.3V as the supply voltage. 4 signal outputs are provided for enhancing output frequency as much as possible. Low timing skew is offered by this RF synthesizer at maximum 0.5 ns. Frequency generator is able to reali133.33MHze high efficiency when operating at a frequency of 133.33MHz.
CY2304SXC-2 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2304SXC-2 Applications
There are a lot of Cypress Semiconductor Corp CY2304SXC-2 Clock Generators applications.
- Aerospace and defense
- Communication infrastructure
- Broadcast communication
- Bluetooth receivers
- Quenching?
- Wireless infrastructure
- Camera systems
- Pagers
- Navigation, positioning and surveillance system for aircraft, ships and ships
- PCI express cards