CY2304SXC-2T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2304 |
| Pin Count | 8 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:4 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.5 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2304SXC-2T Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. As part of the 8-SOIC (0.154, 3.90mm Width) package, this clock generator is embedded. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. It contains 8 terminations that can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. A total of 1 circuits are implemented to access the full performance of the electrical part. An upper frequency limit of 133.3MHz Max can be achieved with this clock-based frequency synthesizer. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. As long as you provide 3V~3.6V supply voltage, it will work. The temperature should be set at 0°C~70°C to ensure reliable performance. This electronic component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. According to the base part number, its related parts can be founded. There are 8 pins on the frequency generator that are available for use. In terms of the supply voltage, PLL clock can handle 3.3V volts. 4 signal outputs are provided for enhancing output frequency as much as possible. There is a low timing skew at 0.5 nsmax with this RF synthesizer.
CY2304SXC-2T Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2304SXC-2T Applications
There are a lot of Cypress Semiconductor Corp CY2304SXC-2T Clock Generators applications.
- HDD recorders
- Broadcast communication
- Medical equipment
- Digital HDTV systems
- 1 Gigabit Ethernet
- Fiber Channel
- Myriad digital applications
- Automatic control system test
- MRI
- Radar
