CY2305CSXC-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2305 |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Max Supply Current | 32mA |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Height | 1.478mm |
| Length | 4.98mm |
| Width | 3.987mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2305CSXC-1 Overview
In order to package it as a clock IC, the Tube package is used. There is a clock generator embedded in the 8-SOIC (0.154, 3.90mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. In it, there are 8 terminations to be found. This time clock generator should be voltaged at 3.3V. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. Using 1 circuits, the electronic part's full performance can be accessed. Thanks to the Surface Mount, this electric component can easily be installed on a panel. This clock generator would require a maximum supply voltage of 3.6V. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. Clock PLL works with 3V~3.6V supply voltage provided. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. A Fanout Buffer (Distribution), Zero Delay Buffer is a classification for the electronic part in question. The clock-generating IC is a 8-bit device designed specifically for microprocessors. These related electrical parts are available for the base part number CY2305. PLL is designed with 8 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. 5 signal outputs enable clock PLL to magnify output frequency as high as possible. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns. At a frequency of 133.33MHz, frequency generator is capable of achieving high efficiency. This RF synthesizer operation requires a maximum current of 32mA.
CY2305CSXC-1 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2305CSXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY2305CSXC-1 Clock Generators applications.
- Clock recovery
- Melting
- Multiplexing communication
- Simple clock clean-up circuits
- Small signal recovery
- Media broadcast servers
- FSK demodulators
- FM demodulation networks for FM operations
- Various decoding circuits
- Closed circuit systems
