CY2305CSXC-1H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2305 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Height | 1.48mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2305CSXC-1H Overview
The Tube method is used for packaging clock ICs. The 8-SOIC (0.154, 3.90mm Width) package contains this clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 260. There are a total of 8 terminations in this file. Clock generator ics require a voltage of 3.3V. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. To access the electronic component's full performance, 1 circuits are implemented. Surface Mount-slots make it easy to mount this electronic component on panels. There is a maximum voltage of 3.6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. This clock PLL works with a supply voltage of 3V~3.6V. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. As far as this electronic part is concerned, it can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Clock PLL is equipped with 8 pin count. This part number is related to its related electronic parts. It is possible to connect to the frequency generators via 8 pins. The supply voltage should be maintained at 3.3V for high efficiency. A Clock Drivers clock generator is essentially what this device is. 5 signal outputs are provided for enhancing output frequency as much as possible. At 0.2 ns Max, this analog clock generator exhibits low timing skew. At a frequency of 133.33MHz, the system can achieve high efficiency.
CY2305CSXC-1H Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2305CSXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY2305CSXC-1H Clock Generators applications.
- PMR (Professional Mobile Radio)
- Microwave backhaul IF
- Electronic equipment
- Radio receivers
- FMCW Radar
- Fiber Channel
- Frequency Modulation (FM) stereo decoders
- Melting
- Tracking filters
- Coherent carrier tracking
