CY2305CSXI-1
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2305 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Height | 1.48mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
CY2305CSXI-1 Overview
Clock ICs are packaged using the Tube method. A Clock PLL is included with the 8-SOIC (0.154, 3.90mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. There are 8 terminations found in the file. To operate this time clock generator, 3.3V voltage should be applied. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. It is possible to access the full performance of the electrical part by implementing 1 circuits. PLL clock is mounted in the way of Surface Mount. There is a maximum voltage of 3.6V for this clock generator. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. As long as you provide 3V~3.6V supply voltage, it will work. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with LVCMOS logic levels. It has been classified as a Fanout Buffer (Distribution), Zero Delay Buffer electronic part, which means that it is a semiconductor. Microprocessor-specific clock PLL with 8 bits. It is possible to find its related electronic parts by searching for the base part number CY2305. The clock PLL has 8 pins that are available. In terms of the supply voltage, PLL clock can handle 3.3V volts. The device is usually classified as a type of Clock Drivers device. The frequency synthesizer features 5 signal outputs to ensure as high a frequency as possible. The maximal same edge skew (tskwd) can not be exceeded. At 133.33MHz, frequency synthesizer achieves high efficiency. It is possible to supply up to 35mA of current for this clock generator operation.
CY2305CSXI-1 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2305CSXI-1 Applications
There are a lot of Cypress Semiconductor Corp CY2305CSXI-1 Clock Generators applications.
- Ports
- DVD recorders
- Pulsed digital systems
- Time to digital converters
- Electronic countermeasures
- Wide area power system
- Electronic equipment
- Antenna automatic tracking
- Wi-Fi routers
- Signal generator
