CY2305CSXI-1H
| Parameters | |
|---|---|
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Height | 1.48mm |
| Length | 4.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2305 |
| Output | LVCMOS |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 35mA |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
CY2305CSXI-1H Overview
Clock ICs are packaged using the Tube method. This clock generator is embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. As you can see, it consists of 8 terminations. This time clock generator should be voltaged at 3.3V. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. 1 circuits are implemented to access the electronic component's full performance. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. It is safe to use this frequency synthesizer with a supply voltage above 3V. Clock generator ic works with 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. As far as electrical parts go, this component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. It is a 8-bit clock PLL designed specifically for microprocessors. The related electronic parts of part number CY2305 are listed below. There is a 8 pin that is available on the digital clock generator. RF synthesizers can handle voltages up to 3.3V. A Clock Drivers clock generator is essentially what this device is. 5 signal outputs are provided for enhancing output frequency as much as possible. At 0.2 ns Max, this analog clock generator exhibits low timing skew. At a frequency of 133.33MHz, frequency generator is capable of achieving high efficiency.
CY2305CSXI-1H Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2305CSXI-1H Applications
There are a lot of Cypress Semiconductor Corp CY2305CSXI-1H Clock Generators applications.
- Cable television converter boxes
- Digital HDTV systems
- Simple clock clean-up circuits
- VSAT (Small Ground Satellite Station)
- Signal frequency synthesis circuits
- Notebooks
- Camera systems
- Multiplexing communication
- Local oscillators (LOs)
- Microwave backhaul IF
