Parameters |
Contact Plating |
Lead, Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Technology |
CMOS |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
220 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Reach Compliance Code |
not_compliant |
Frequency |
133MHz |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
CY2305 |
Pin Count |
8 |
Number of Outputs |
5 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
32mA |
Frequency (Max) |
133.33MHz |
Output Characteristics |
3-STATE |
Input |
Clock |
Ratio - Input:Output |
1:5 |
PLL |
Yes |
Differential - Input:Output |
No/No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
CY2305SC-1 Overview
Tube-method packaging is used for clock ICs. The 8-SOIC (0.154, 3.90mm Width) package contains this clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 220. As you can see, it consists of 8 terminations. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by Clock as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. An upper frequency limit of 133.33MHz Max can be achieved with this clock-based frequency synthesizer. Surface Mount-slots make it easy to mount this electronic component on panels. Clock generators can take up to 3.6V of power as a maximum supply voltageA maximum voltage of 3V should be used for this frequency generator for safety reasons. Clock PLL works with 3V~3.6V supply voltage provided. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. This electronic component can be classified into Fanout Buffer (Distribution), Zero Delay Buffer. It is a 8-bit IC that is designed for microprocessors specifically. This part number CY2305 is related to the following electrical components. There are 8 pins on the frequency generator that are available for use. The maximum supply voltage that analog clock generator can handle is 3.3V. 5 signal outputs maximi5e the output frequency. Frequency generator is able to reali133MHze high efficiency when operating at a frequency of 133MHz.
CY2305SC-1 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2305SC-1 Applications
There are a lot of Cypress Semiconductor Corp CY2305SC-1 Clock Generators applications.
- Melting
- Vector network analyzers (VNA)
- Digital circuits
- DVD add-on cards for multimedia PCs
- Wireless infrastructure
- Motor speed controls
- Digital HDTV systems
- Electronic countermeasures
- Satellite receivers
- Test equipment