CY2305SXC-1H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2305 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 5 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Propagation Delay | 0 s |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Max Junction Temperature (Tj) | 150°C |
| Number of True Outputs | 8 |
| Ambient Temperature Range High | 70°C |
| Height | 1.727mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2305SXC-1H Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. A Clock PLL is included with the 8-SOIC (0.154, 3.90mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As you can see, it consists of 8 terminations. Clock generator ics require a voltage of 3.3V. The input of this clock generator is designed to be Clock. To access the electronic component's full performance, 1 circuits are implemented. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximal supply voltage (Vsup) reaches 3.6V. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. There is a 8-bit clock-generating IC built specifically for microprocessors in this frequency generator. CY2305 is the base part number for finding related electronic parts. There is an available 8 pin on the clock generators. In terms of the supply voltage, analog clock generator can handle 3.3V volts. Analog clock generator is configured with 8 pins that enable the high true output. Using a frequency of 133.33MHz allows frequency synthesizer to achieve high efficiencies. This is a 5-element clock generator with low jitter performance.
CY2305SXC-1H Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
CY2305SXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY2305SXC-1H Clock Generators applications.
- PMR (Professional Mobile Radio)
- VSAT (Small Ground Satellite Station)
- Electronic countermeasures
- Integrated phase noise in aerospace systems
- Laptops
- Smartphones
- High-frequency induction heating
- Time to digital converters
- Picocells, femtocells and small cells
- Symbol synchronization
