banner_page

CY2305SXI-1

3.3V Fanout Buffer (Distribution), Zero Delay Buffer CY2305 Clock Generators 8 Pins 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 3V~3.6V Tube


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY2305SXI-1
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 829
  • Description: 3.3V Fanout Buffer (Distribution), Zero Delay Buffer CY2305 Clock Generators 8 Pins 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 3V~3.6V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold, Tin
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2002
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Type Fanout Buffer (Distribution), Zero Delay Buffer
Terminal Finish Matte Tin (Sn)
Technology CMOS
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Frequency 133.33MHz
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number CY2305
Pin Count 8
Number of Outputs 5
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Nominal Supply Current 35mA
Max Supply Current 35mA
Output Characteristics 3-STATE
Input Clock
Ratio - Input:Output 1:5
PLL Yes
Differential - Input:Output No/No
Height 1.48mm
Length 4.98mm
Width 3.99mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY2305SXI-1 Overview


Tube-method packaging is used for clock ICs. This clock generator is embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. 8 terminations can be found in frequency generators. This electronic frequency generator requires a voltage of 3.3V. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. To access the electronic component's full performance, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. This frequency synthesizer requires a supply voltage above 3V to be safe. There are 3V~3.6V available for use with this clock PLL. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. Fanout Buffer (Distribution), Zero Delay Buffer is the type of electrical part that this component is classified as. Clock PLL is equipped with 8 pin count. It is possible to find its related electronic parts by searching for the base part number CY2305. There is an available 8 pin on the clock generators. Electronic frequency generator can handle voltages up to 3.3V. Clock PLL is configured with 5 output. By operating at a frequency of 133.33MHz, frequency generator is able to achieve high efficiency. This RF synthesizer operation requires a maximum current of 35mA.

CY2305SXI-1 Features


Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY2305SXI-1 Applications


There are a lot of Cypress Semiconductor Corp CY2305SXI-1 Clock Generators applications.

  • Skew suppression
  • Walkie-talkies
  • HDD recorders
  • Digital logic circuits
  • Multiplexing communication
  • FM demodulation networks for FM operations
  • Signal generator
  • Automatic control
  • FSK demodulators
  • Notebooks

Write a review

Note: HTML is not translated!
    Bad           Good