CY2308SC-5H
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Frequency | 133MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 70mA |
| Frequency (Max) | 66.67MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CY2308SC-5H Overview
Clock ICs are packaged using the Tube method. Embedded in the 16-SOIC (0.154, 3.90mm Width) package is this Clock PLL. A maximum temperature of 240 can be sustained by this clock generator ic during reflowing. It contains a total of 16 terminations within RF synthesizer. This electronic frequency generator requires a voltage of 3.3V. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. To access the full performance of the electronic component, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 66.67MHz is available. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock generators can take up to 3.6V of power as a maximum supply voltageIt is safe to use this frequency synthesizer with a supply voltage above 3V. Clock generator ic works with 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. This electronic component can be classified into Fanout Buffer (Distribution), Zero Delay Buffer. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. The related electrical components for the base part number CY2308 can be found below. There are 16 pins that are available on the clock PLL. PLL clock can handle a voltage of 3.3V as its supply voltage. The clock PLL is generally classified as a Clock Drivers device. 8 signal outputs are provided for enhancing output frequency as much as possible. As a result of this digital clock generator, there is a low timing skew at 0.2 ns max. At 133MHz, frequency synthesizer achieves high efficiency.
CY2308SC-5H Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SC-5H Applications
There are a lot of Cypress Semiconductor Corp CY2308SC-5H Clock Generators applications.
- Precision auxiliary angle deflection measurement
- Signal modulation and demodulation
- Automatic control
- Vector network analyzers (VNA)
- Infotainment systems
- Clock signals to the high-speed Digital RF circuits
- Tracking filters
- Digital HDTV systems
- Myriad digital applications
- Radio receivers
