CY2308SI-2
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CY2308SI-2 Overview
It is packaged using the Tube method since it is a clock IC. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. A maximum temperature of 240 can be sustained by this clock generator ic during reflowing. There are a total of 16 terminations in this file. This clock generator ic should receive a voltage of 3.3V. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. Using 1 circuits, the electronic part's full performance can be accessed. A clock-based RF synthesizer that provides a max frequency of 133.3MHz is available. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageThere should be a voltage supply above 3V for this frequency generator in order to ensure its safety. Clock PLL works with 3V~3.6V supply voltage provided. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with LVCMOS logic levels. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. The clock-generating IC is a 16-bit device designed specifically for microprocessors. According to the base part number CY2308, its related parts can be found. There is an available 16 pin on the PLL. The maximum supply voltage that clock generator can handle is 3.3V. The device is usually classified as a type of Clock Drivers device. The output frequency can be amplified as high as possible with its 8 signal outputs. At 0.2 ns Max, this analog clock generator exhibits low timing skew. Frequency generator is able to reali133MHze high efficiency when operating at a frequency of 133MHz.
CY2308SI-2 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SI-2 Applications
There are a lot of Cypress Semiconductor Corp CY2308SI-2 Clock Generators applications.
- Local oscillators (LOs)
- Frequency shifting decodes
- Microwave radio
- Digital circuits
- Navigation, positioning and surveillance system for aircraft, ships and ships
- High-frequency induction heating
- Laptops
- Camera systems
- MRI
- PMR (Professional Mobile Radio)
