CY2308SXC-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2308SXC-1 Overview
The Tube method is used for packaging clock ICs. This clock generator is embedded in the 16-SOIC (0.154, 3.90mm Width) package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result, frequency synthesizers can be found to contain 16 terminations. Clock generator ics require a voltage of 3.3V. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. 1 circuits are used to achieve clock PLL's superior flexibility. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. It is a 16-bit clock PLL designed specifically for microprocessors. This part number CY2308 is related to the following electrical components. PF synthesizers is equipped with 16 pins. There is a maximum supply voltage of 3.3V that frequency generators can handle. Clock Drivers-type frequency generators are usually classified as this type. The frequency synthesizer features 8 signal outputs to ensure as high a frequency as possible. At 0.2 ns Max, this clock generator offers low timing skew. By operating at a frequency of 133.3MHz, RF synthesizer is able to reali133.3MHze high efficiency.
CY2308SXC-1 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY2308SXC-1 Clock Generators applications.
- 1 Gigabit Ethernet
- Electronic equipment
- 10 Gigabit Ethernet
- PCI express cards
- Clock signals to the high-speed Digital RF circuits
- GPS systems
- Pagers
- Symbol synchronization
- Ports
- Frequency synthesis
