CY2308SXC-1H
| Parameters | |
|---|---|
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Height | 1.48mm |
| Length | 9.98mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 70mA |
| Max Supply Current | 70mA |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
CY2308SXC-1H Overview
As a clock IC, PLLs is packaged using the Tube method. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 16 terminations that can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by LVCMOS, LVTTL as its input. To access the full performance of the electronic component, 1 circuits are implemented. Surface Mount-slots make it easy to mount this electronic component on panels. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. This clock PLL works with a supply voltage of 3V~3.6V. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. LVCMOS is designed for clock generator's output. This electronic component can be classified into Fanout Buffer (Distribution), Zero Delay Buffer. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. The related electrical components for the base part number CY2308 can be found below. The clock PLL has 16 pins that are available. Time clock generator is capable of handling a voltage of 3.3V. The clock PLL is generally classified as a Clock Drivers device. 8 signal outputs enable clock PLL to magnify output frequency as high as possible. The timing skew of this frequency synthesizer is low at 0.2 nsmax. High efficiency is achieved when operating at a frequency of 133.3MHz. This frequency synthesizer operates at a maximum current of 70mA.
CY2308SXC-1H Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXC-1H Applications
There are a lot of Cypress Semiconductor Corp CY2308SXC-1H Clock Generators applications.
- Notebooks
- GPS systems
- Symbol synchronization
- Phase modulation cellular systems
- 10 Gigabit Ethernet
- Myriad digital applications
- HDD recorders
- Reference signals to RF systems
- Pulsed digital systems
- Automatic control
