CY2308SXC-1T
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
CY2308SXC-1T Overview
Tape & Reel (TR)-method packaging is used for clock ICs. A Clock PLL is included with the 16-SOIC (0.154, 3.90mm Width) package. This clock generator will sustain a maximum temperature of 260 when reflown. In it, there are 16 terminations to be found. For this clock generator ic, a voltage of 3.3V is required. LVCMOS, LVTTL is designed as this clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. It provides a maximum frequency of 133.3MHz. This component can be conveniently installed on the panel thanks to the Surface Mount. It would take a maximum supply voltage of 3.6V to operate this time clock generator. A maximum voltage of 3V should be used for this frequency generator for safety reasons. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. This electronic component can be classified into Fanout Buffer (Distribution), Zero Delay Buffer. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. It is possible to find its related electronic parts by searching for the base part number CY2308. Clock generator is designed with 16 pins. Electronic frequency generator can handle voltages up to 3.3V. The clock PLL is generally classified as a Clock Drivers device. 8 signal outputs are provided for enhancing output frequency as much as possible. At 0.2 ns Max, this clock generator offers low timing skew.
CY2308SXC-1T Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXC-1T Applications
There are a lot of Cypress Semiconductor Corp CY2308SXC-1T Clock Generators applications.
- Precision auxiliary angle deflection measurement
- DVD recorders
- Radiotelephones
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Coherent detection of the signal
- Digital logic circuits
- Signal frequency synthesis circuits
- Microwave point-to-point systems
- Camera systems
- High-speed communication applications
