CY2308SXC-3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | No/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2308SXC-3 Overview
Clock generator is packaged in the way of Tube. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are a total of 16 terminations in this file. Clock generator ics require a voltage of 3.3V. In this clock generator, LVCMOS, LVTTL is used as the input to the clock. It is possible to access the full performance of the electrical part by implementing 1 circuits. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.3MHz. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. The maximal supply voltage (Vsup) reaches 3.6V. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. There are 3V~3.6V available for use with this clock PLL. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. The RF synthesizer is compatible with LVCMOS logic levels. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. In particular, this clock PLL is designed to be used with microprocessors. These related electrical parts are available for the base part number CY2308. PLL is designed with 16 pins. RF synthesizers can handle a voltage of 3.3V as the supply voltage. Fundamentally, this is a kind of Clock Drivers clock PLL. The output frequency can be amplified as high as possible with its 8 signal outputs. There is a low timing skew at 0.2 nsmax with this RF synthesizer.
CY2308SXC-3 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXC-3 Applications
There are a lot of Cypress Semiconductor Corp CY2308SXC-3 Clock Generators applications.
- Main oscillator in receiver
- Vector network analyzers (VNA)
- Remote telemetry and instrumentation
- Closed circuit systems
- Cable television converter boxes
- 1 Gigabit Ethernet
- Coherent carrier tracking
- Simple clock clean-up circuits
- Frequency shifting decodes
- FM demodulation networks for FM operations
