CY2308SXC-3T
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2308 |
| Output | LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | No/Yes |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| RoHS Status | ROHS3 Compliant |
CY2308SXC-3T Overview
Clock generator is packaged in the way of Tape & Reel (TR). Clock PLL is embedded in the 16-SOIC (0.154, 3.90mm Width) package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. It contains a total of 16 terminations within RF synthesizer. Basically, this time clock generator needs a voltage of 3.3V. As the Clock PLL's input, LVCMOS, LVTTL is designed to be used in order to generate the clock signal. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 133.3MHz Max can be achieved with this clock-based frequency synthesizer. PLL clock is mounted in the way of Surface Mount. It would be possible to supply this clock PLL with 3.6V of power. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. This electronic component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer. In particular, this clock PLL is designed to be used with microprocessors. The related electronic parts of part number CY2308 are listed below. PLL is designed with 16 pins. Clock PLL is capable of handling a voltage of 3.3V. The clock PLL is generally classified as a Clock Drivers device. Clock PLL is configured with 8 output. The maximal same edge skew (tskwd) can not be exceeded.
CY2308SXC-3T Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2308SXC-3T Applications
There are a lot of Cypress Semiconductor Corp CY2308SXC-3T Clock Generators applications.
- Tracking filters
- Test equipment
- 10 Gigabit Ethernet
- Phase modulation cellular systems
- Radar
- High-frequency induction heating
- FSK demodulators
- Multiplexing communication
- Pulsed digital systems
- Medical equipment
